Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
Test Case #:886 | Test Case Name: Configure Adjusted Consumption (N)
|
System: OpenLMIS
| Subsystem: blue |
Test case designed by: Paulina Borowa | Design Date:13.01.2017 |
Short description: Acceptance Criteria Verify that: - in the APIs for configuring a requisition template, this new field can be added into the requisition template (by an admin with permissions to configure the template for their program)
- if this field is NOT configured/associated to a requisition template, it does not appear on the requisition form
- the field can be configured with a display order that controls where it appears on the requisition
- in the APIs for initiating and saving a requisition, if this field is part of the template, then this field appears on the requisitions. Its display order should be based on the requisition template.
- The field is a calculated field, read only.
value in the requsitions is calculated based on the calculation above (upholding the assumptions around F)- For this field to be added to the template, variables C and X are also required.
- Data validation for C and X to be done during the admin template configuration.
Variable F is not required to be configuredIf F isn't used in the template, zero is is used (meaning the second half of the formula is 0).- Display order is enforced on the requisition
- Display order is set on the requisition template
- UI: For any requisition with this field, the requisition form displays it in the proper display order.
| |
Step | Action | Expected system response | Comment |
1 | | | |
2 | | | |
3 | | | |
4 | | | |
5 | | | |
6 | | | |
7 | | | |
8 | | | |